The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**robnolimit** · 05-17-2011, 07:52 PM

Step Notch. The notches were fabbed from 2 x 4 x .120 wall tubing. The bottom of the new notch is just above ( 1/8") the top of the old frame. Provides for 4" of additional clearance. the front sean is diamond plated for strength, the rear is not, no real load after the Shockwave mount, and the crossbar adds strength to the joint.

05-17-2011, 07:52 PM	#552
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: Make it handle Step Notch. The notches were fabbed from 2 x 4 x .120 wall tubing. The bottom of the new notch is just above ( 1/8") the top of the old frame. Provides for 4" of additional clearance. the front sean is diamond plated for strength, the rear is not, no real load after the Shockwave mount, and the crossbar adds strength to the joint. Attached Images __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! Last edited by robnolimit; 05-18-2011 at 11:08 AM.