Quote:
Originally Posted by caddyhack
I also agree that the brake drums arent adjusted properly.. jack it up take the drum off and adjust the adjuster on the bottom one- two clicks at a time untill you can hear the drums dragging slightly and have little resistance when spinning them ( its kindof a feeeling/hearing thing dont under adjust abd dont over adjust them) Good luck .... some drums have a slot so you can adjust them with the drums on the axle
Posted via Mobile Device
|
thanks for the help.
when I mounted them, I did just that. I tightened the adjusters till the drum started dragging on both sides...
I am taking the wheels and drums of 2nite to see if they are wearing evenly and to check if the cilinders come out evenly and equally far...
hope I find something, I'll report back here.
thanks sofar!