The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Marv D · 05-29-2011, 11:44 AM

If you make it into the 11's with those crappy TFS piece of junk heads...

Oh wait, did I say any of that out loud!!!

If those are the early 'twisted wedge' design... all I'll say is GOOD LUCK!!!

The second generation of TFS small block heads were basically a aluminum clone of the GM Bowtie Phase6 head. THAT was a decent offering.

So I'm with the ripdawg... unless everything go much better than the 'typical',,, high 12's

05-29-2011, 11:44 AM	#6
Marv D Registered Truck Offender Join Date: May 2008 Location: hells training ground (aka Ariz) Posts: 3,118	Re: swb 383 If you make it into the 11's with those crappy TFS piece of junk heads... Oh wait, did I say any of that out loud!!! If those are the early 'twisted wedge' design... all I'll say is GOOD LUCK!!! The second generation of TFS small block heads were basically a aluminum clone of the GM Bowtie Phase6 head. THAT was a decent offering. So I'm with the ripdawg... unless everything go much better than the 'typical',,, high 12's __________________ Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral.