[05Gibbs]

yeah its not a dd at all but i just want to keep it on pump gas and be able to do a little mix for the track. i allready have a cam that im going to use for now and see how it works its a crane 290. its 248/248 with .555 lift and i i have 1.6 rockers so if i did the math correct it will be just under .600 lift and im going to have to change springs and keepers on the heads anyways mine are set up for hyd flat tappet cams up to 540 lift. and may be putting some nitrous on it also. i have probe forged pistins but my rods are the thing im worried about. they are elgin 6in I beam rods with arp rod bolts. they are forged just not sure what they can handle. and im also up in the air on what kind of intake to run. im going to be shifting around 6500 so rpm air gap seems like a good choice sence it will be in a 4500lb brick but i dont have any experience with single plane intakes. i have always ran a regular performer rpm in most everything