The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

crazy longhorn · 07-27-2003, 01:25 PM

I like a universal(cut & fit wire set). I have been running Accel 300+ wires, but have replacea a couple with MSD spiral core wires(1 wire to fit the Hooker headers,& 1 to add an external coil). I have to say that I am really impressed with the crimp tools that come with the msd wires,& will be running a full set when the cash alows

for a ready to go set of wires, the sb Vette wires should fit the bill........not sure on the yr, but I think '75 is correct. good luck,crazyL

07-27-2003, 01:25 PM	#2
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	I like a universal(cut & fit wire set). I have been running Accel 300+ wires, but have replacea a couple with MSD spiral core wires(1 wire to fit the Hooker headers,& 1 to add an external coil). I have to say that I am really impressed with the crimp tools that come with the msd wires,& will be running a full set when the cash alows for a ready to go set of wires, the sb Vette wires should fit the bill........not sure on the yr, but I think '75 is correct. good luck,crazyL __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....