Re: e brake cable shortening
OK, here's my 2 cents. If possible, why not move the forward bracket a little farther forward and move the rear bracket a little farther back? You might have to make a different bracket for onr or the other though. Mine is an 84 K20 long box and the front bracket is the L/F body mount so moving that is out of the question. The rear bracket is seperate so could be moved. Doing it this way would make replacement down the road easier than modifying the cable itself in some way. I made a cable for an 87 Nissan by using the old casing and replacing the core with SS wire rope and welding a steel plug on either end for attachment. jim
__________________
1984 K20 350M engine with 465,000 miles. Well, it's finally done!! Almost 2 years of work, but it was really worth the effort. Little stuff left to do is mount winch, wet sand & buff out and build belly pan\running boards. Body work takes lots and LOTS of beer!!!! God, Guts and Guns made America and God, Guts and Guns will preserve it! The worst thing you could do is get into my sights, but that don't matter, you'll never know it, cause you'll never hear the shot  Jim or Paladin whichever you choose.
|