[trusty72]

Thank you. I used photobucket and this is the best i could do, sorry. If anyone needs to know exactly what is required to put a 67-72 suburban on a 67-72 lwb frame, these pics show step by step from front to back. Picture #1 is the front body mount, lines up perfectly. Picture #2 is an actual suburban frame mount that i was lucky enough to get with the body. Just drill 4 holes per side after the body is located with the other mounts. Picture #3 is the middle bed mount , just drill hole over about an inch from the original. Also note the front and second bed mount on the lwb frame must be removed along with the rear cab mount before you set the body on. Picture #4 is as simple as drilling a hole in the frame when the body is centered. This will be the rear most mount for now until i graft in the suburban rear frame stub. This is not necessary, but will provide mounting for the rear bumper, and give more frame for that last body mount to sit on. See picture #5 to see where this will be.