[xpickup]

Started the do some metal work tonight. Was working on the hood corner and closed the hood and now I can't open it! Some how it got stuck, I worked it for a while and still could not open it. It irritated me so I will save that for another day. I need to redo the corner because something twisted it up and it does not fit at all. so I decided to start on the hammer and dolly work on the fenders. I think both fenders were hit by everything known to man. I have the front of the drivers fender fairly good. After the hammer and dolly I used the shrinking disc and that really smooths out the high spots. I like to get the metal as straight as possible then there is not so much filler. The last picture looks rough but is the finish from hammering and dollying, then running the shrinking disc over it. I should have ran the DA over it for the picture.

Shannon