|
Re: what did you get done 6/12/11 edition
I finished assembling my rear spring on my 1987 V2500. Restoring them was alot of work. I sand blasted each leaf then sanded and acid primed and painted each leaf. I then assembled them with new plastic wear slides.
I also started rebuiling the TBI. The truck was runing when I removed it but when I disassembled the regulator about 1/4 cup of rust came out of it. The injector bodies were also very rusted and pitted. I cleaned it all up but Ineed to get the throttle shaft seals which I can not find. I will plan to install new injectors as well.
|