|
Re: How to wire in aux speakers.
Quote:
Originally Posted by Blake_H
I don't know if this would be the right way, but I would consider doing it this way.
Small amp, wired like amps should, going to your tool box speakers. I would then wire in an on/off toggle switch on the 12v trigger to the amp. That way you can shut the amp off via the toggle when your driving down the road.
Something like this Kenwood. But, if you really want to crank it up, you will need a bigger amp.
Hope this helps! |
Yea x2 that's basically what I was thinking. Was you can have all your speakers and stuff inside the truck. Then have an amp and speakers in your tool box. Run it all off a toggle to control when its on.
__________________
*HOODS is what I answer too*  -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold
-'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit  
-'86 K5 Blazer Silverado 6.2 4" lift 35"s
-'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's
-'83 Monte Carlo T-Tops. 126,500 Original Miles
-LATER 
I would rather push a Chevy then drive a ford!!  |