[LostMy65]

Here's another:

Originally Posted by 78 Chevyrado

I have an edelbrock 1406 and use this regulator with it
http://www.jegs.com/i/Holley/510/12-803/10002/-1?CT=999

It works perfectly.
Here's how I mounted mine




I put a gauge in the bypass side or you could just plug it.
Don't mind the rubber line from the pump to the regulator. It's worked so far but when I redo the engine soon, it will have a steel line up to about the carb and then turn out and go up to the regulator with some fuel injection hose so i can still mount the filter where it is.