The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

PanelDeland · 08-02-2003, 06:23 PM

TF, you can buy 2" lowering springs or you can buy 2' lowering blocks.You can also get 1" lowering springs(maybe blocks).The advantage of blocks seems to be that they are tapered to the correct driveshaft angle.I would assume you could maybe get 1 1/2" blocks but I don't know where.1 3/4" is prolly going to be custom blocks or a block spring combo.Good luck.

08-02-2003, 06:23 PM	#2
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	TF, you can buy 2" lowering springs or you can buy 2' lowering blocks.You can also get 1" lowering springs(maybe blocks).The advantage of blocks seems to be that they are tapered to the correct driveshaft angle.I would assume you could maybe get 1 1/2" blocks but I don't know where.1 3/4" is prolly going to be custom blocks or a block spring combo.Good luck. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"