The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

djracer · 07-14-2011, 07:08 AM

The motor is a 454 with stock type ls6 dome pistons and 781 oval ports. The motor has an Edelbrock performer rpm cam and intake with the matching springs. We are topping this combo with a 650 double pumper. We have a Ptc convertor and a built turbo 400 and a 9 inch with moser axles and a posi unit. This truck was ordered with leaf spring but will be swapped out for trailing arms and coilover shocks. We still have to buy wheels but I am hoping to get it to move on its own power before Cade's Birthday the end of August. I wish I had a truck like this at 14.

07-14-2011, 07:08 AM	#60
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: DJ JR's Build Thread The motor is a 454 with stock type ls6 dome pistons and 781 oval ports. The motor has an Edelbrock performer rpm cam and intake with the matching springs. We are topping this combo with a 650 double pumper. We have a Ptc convertor and a built turbo 400 and a 9 inch with moser axles and a posi unit. This truck was ordered with leaf spring but will be swapped out for trailing arms and coilover shocks. We still have to buy wheels but I am hoping to get it to move on its own power before Cade's Birthday the end of August. I wish I had a truck like this at 14. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!