[Steve Hafner]

Here are a couple more pictures I found in my "FILES" that might help you. The first is of a 68 FLEETSIDE with the wood taken out and the second is an underneath shot of another FLEETSIDE bed that is completely off the truck, which shows four of the "hold-down bolt's" washers and nuts at the top of the picture, about a foot in from each side. In that picture you can get a better view of the nuts and washers going through the crossmembers that hold the metal strips down . . . and there are A LOT OF THEM !!! I'm almost ready to tackle this project myself, on my wood bed.