The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Whittaker · 07-15-2011, 11:51 AM

We have one that I used on my Chevelles but It is 80 miles each way. I figuring out that there seem to be 3 different size carrier bearings, and I think I need 1" or 3/4"cut from front any way for the 4l80E.

But I will have to get the rear in gear back under the Sub To get a good ride height measurement.

CPP has a Slip SHaft drive line for the rear.

07-15-2011, 11:51 AM	#3
Whittaker Registered User Join Date: Feb 2011 Location: Champaign, Illinois Posts: 110	Re: Drive shaft issues. We have one that I used on my Chevelles but It is 80 miles each way. I figuring out that there seem to be 3 different size carrier bearings, and I think I need 1" or 3/4"cut from front any way for the 4l80E. But I will have to get the rear in gear back under the Sub To get a good ride height measurement. CPP has a Slip SHaft drive line for the rear.