The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Jim_PA · 07-15-2011, 03:51 PM

TAC is on the drivers side of the firewall.

If you have a DBW engine harness, there should be a plug that goes to the TAC in there somwhere... most of those wires go up to the throttle body.

From the TAC, make sure you get the cable that goes through the firewall, and get the pedal too.

07-15-2011, 03:51 PM	#3
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: DBW components TAC is on the drivers side of the firewall. If you have a DBW engine harness, there should be a plug that goes to the TAC in there somwhere... most of those wires go up to the throttle body. From the TAC, make sure you get the cable that goes through the firewall, and get the pedal too.