The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Fastrucken · 07-19-2011, 07:23 PM

Hey if you haven’t permanently hooked this up, you could hook this up with only one vacuum line attached to it. Just place a tee after a check valve and place it there. So it could go: engine, check valve, tee with one end to your reservoir and the other end of the tee to the power booster. The lack of the additional line might keep things clean under the hood and be a bit easier to plumb.

Graham

07-19-2011, 07:23 PM	#15
Fastrucken Junior Member Join Date: May 2006 Location: Peninsula, Oh Posts: 197	Re: Power brake vacuum reservoir Hey if you haven’t permanently hooked this up, you could hook this up with only one vacuum line attached to it. Just place a tee after a check valve and place it there. So it could go: engine, check valve, tee with one end to your reservoir and the other end of the tee to the power booster. The lack of the additional line might keep things clean under the hood and be a bit easier to plumb. Graham __________________ A good friend will come bail you out of jail, but a true friend will be sitting next to you saying, "That was ****ing awesome."