[racedvl]

Originally posted by beaterC10
I used 72 spindles to put disk brakes on a 63 2wd a few years back. I think I used the 72 spindles, centerlink , tie rod ends, and pitman arm. The rotors, calipers, master cylinder, and prop valve I think were from a mid 70's truck. The only reason i used the later model stuff was the fact I snagged them free from a truck a friend was junking. The master cylinder push rod and hard lines had to be fabbed. I think the flex hoses were from a late 60's Impala application. Seemed like the wagons and Impalas with big brakes used a lot of the same hardware as the trucks.

Everything alinged ok then?