The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

njlimbaugh · 07-23-2011, 09:25 AM

Unbolt driveshaft at rear axle (4 bolts on U-Joint), lower rear of shaft enough to clear axle and pull front of shaft out of transmission. Wrap tape around the bearings on the rear of shaft at U-Joint so you don't lose them in transit.

07-23-2011, 09:25 AM	#4
njlimbaugh Registered User Join Date: Jun 2011 Location: LaFayette GA Posts: 111	Re: Needing advice Unbolt driveshaft at rear axle (4 bolts on U-Joint), lower rear of shaft enough to clear axle and pull front of shaft out of transmission. Wrap tape around the bearings on the rear of shaft at U-Joint so you don't lose them in transit.