The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**geunther** · 07-24-2011, 04:06 PM

Replacing two piece drive shaft with a one piece due to the lift and new joint angles. I will keep the original so it would be a simple bolt in to go back to stock.

The transfer case has some build markings in kind of a turquoise color and some numbering. Also the yoke has a green marking. The two pieces of the drive shaft have a silver sticker with what I believe to be the part number printed on them.

07-24-2011, 04:06 PM	#2
geunther Senior Member Join Date: Apr 2005 Location: Cheyenne, WY Posts: 740	Re: 79 1/2 ton, 4x4, low milage build Replacing two piece drive shaft with a one piece due to the lift and new joint angles. I will keep the original so it would be a simple bolt in to go back to stock. The transfer case has some build markings in kind of a turquoise color and some numbering. Also the yoke has a green marking. The two pieces of the drive shaft have a silver sticker with what I believe to be the part number printed on them. Attached Images __________________ The lid is stuck on my jar of anti seize