The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Sloppy Steering

lilpoindexter · 07-25-2011, 10:20 PM

I completly re-did the front end on my '78. I couldn't believe all the tie rods, ball joints were tight...They all had greaseable fittings, and the previous owner loved to lube it up.

The only place I had slop was in the box itself.

I don't think you can go wrong just replacing every bushing/ ball joint/ rag joint, etc in the front.

07-25-2011, 10:20 PM	#4
lilpoindexter Registered User Join Date: Sep 2010 Location: los angeles Posts: 1,136	Re: Sloppy Steering - Help I completly re-did the front end on my '78. I couldn't believe all the tie rods, ball joints were tight...They all had greaseable fittings, and the previous owner loved to lube it up. The only place I had slop was in the box itself. I don't think you can go wrong just replacing every bushing/ ball joint/ rag joint, etc in the front.