The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Lippyp · 08-05-2003, 07:30 AM

You can get proper cable oiling tools, not sure where you'd get them in the U.S, but I'd try a good Motorcycle shop. These connect onto the end of the cable and have a little hand operated pump that forces oilo down into the cable.

08-05-2003, 07:30 AM	#3
Lippyp English Chevy Owner Join Date: May 2002 Location: Shropshire, UK/ Lot, France Posts: 1,848	You can get proper cable oiling tools, not sure where you'd get them in the U.S, but I'd try a good Motorcycle shop. These connect onto the end of the cable and have a little hand operated pump that forces oilo down into the cable. __________________ Phil '67 C10 long fleet. 350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon 2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission