|
Ed have you had good results with thinning the west epoxy?
They do not recommend thinning the resin with solvents, but warming the resin and hardner before mixing will give you pretty good penitration in to the wood I've done it this way with about 3 coats of west then you have to put on 4 or 5 coats of spar varnish over the west to protect it from UV rays the varnish holds good as long as all the wood is sealed from moisture, which is what the west does. my 2 cents
Kman
__________________
New 89 chevy 1500 driver
72K20 rust bucket project stripped down to the frame engine rebuild started
71 Blazer - another procect
|