|
Re: blazer project
The evap. core i used is for a late 90's astro van. napa part #288097. It fit almost perfect. I had to use some foam gasket i got from the hardware store to seal one side because there was about a 1/4 inch gap. I also fabbed a filler peice to fit around the top tube. I changed it because i like the cleaner less cluttered look of the newer system and my system had a leak and i didnt want to mess around with the old parts. I plan to run 134a refrigerant so i will probably get a sanden type compressor and a 134a condenser. I have the accumulator/drier also i cant remember what that fits but it will point the fittings in the right direction. I dont know the retail price because i get a discount through work. It was less than $100 with my discount. I probably wont get the a/c finished until this winter my truck budget it spent for the year.
|