The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

whitelightnin92 · 07-31-2011, 03:46 PM

going to try and keep this one driveable and resist the urge to tear it apart. im going to 2/4 drop it. do red wheels with white walls. keep it very simple. i need to collect little things like interior pieces. lights. ect. i am going to put front and rear roll pans on it. main reason being to put tail lights in. im keeping the truck flat black. not going to mess with much body work for now.

also need to rewire most of the truck, its been hacked terribly. i need to pull the column apart too. the right turn signal stays blinking and the lever moves freely on the column. im assuming it came apart inside?

07-31-2011, 03:46 PM	#4
whitelightnin92 Registered User Join Date: Dec 2009 Location: Greenwood, DE Posts: 72	Re: 72 rat project going to try and keep this one driveable and resist the urge to tear it apart. im going to 2/4 drop it. do red wheels with white walls. keep it very simple. i need to collect little things like interior pieces. lights. ect. i am going to put front and rear roll pans on it. main reason being to put tail lights in. im keeping the truck flat black. not going to mess with much body work for now. also need to rewire most of the truck, its been hacked terribly. i need to pull the column apart too. the right turn signal stays blinking and the lever moves freely on the column. im assuming it came apart inside? __________________ 06 ECSB 4X4 L33 HO 3.73s 15.56@89.9 STOCK 92 K1500 TBI350vortec(too much to list) 69 C10 short fleetside(under construction) 72 C10 short stepside(almost driveable)