The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**robnolimit** · 08-05-2011, 06:21 PM

As you can see, it's too short, and it has the wrong mount on one side. But the mechanics are there. The bisquit bushings allow the rod to get longer or shorter when pushed or pulled, softening the load. First I replaced the rod end next the bisquit housing with a urathane adjuster. This gave me the same mount style as the Panhard rod.

08-05-2011, 06:21 PM	#680
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: Make it handle As you can see, it's too short, and it has the wrong mount on one side. But the mechanics are there. The bisquit bushings allow the rod to get longer or shorter when pushed or pulled, softening the load. First I replaced the rod end next the bisquit housing with a urathane adjuster. This gave me the same mount style as the Panhard rod. Attached Images __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! Last edited by robnolimit; 08-05-2011 at 06:34 PM.