View Single Post
Old 08-06-2011, 12:22 PM   #4
bama63
Registered User
 
bama63's Avatar
 
Join Date: Jun 2010
Location: gadsden, alabama
Posts: 468
Re: convertor to flywheel lining up problem

was there a pilot bushing in the rear of the crank shaft? if so i have seen them hold off the converter and bind it up and it should be removed, also the converter should drop in twice while turning when installing, when its right you can feel the pump turning slightly when rotating the converter
__________________
Due to financial constraints, the light at the end of the tunnel will be shut off until further notice
bama63 is offline   Reply With Quote