[padresag]

what has more than likely has happened is that the convertor slipped back out and that you have the convertor jammed between the frt pump and the flexplate. you have more than likely buggered the frt pump. you may have seated the convertor correctly but all that tyou had to do was lower the front of the trans a little to much and oops, drops out and you don't realize it in this instance not like in other circumstances when you really say oops.. with the convertor in there properly , you should be able to move that convertor forwards and backwards freely without it being bolted to the flexplate and the trans housing being bolted securely to the eng block
ron
we all learn things the difficult way in some instances, but that is how you learn!!!!