The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

lenguini · 08-09-2011, 09:29 PM

Greetings all ! Im building a 1965 swb C10 and have conflicting info on whether to use springs or dropped spindles for front.Id like to be at -3" from stock height and -4" rear,but do not want to compromise handling or performance.Im using an 1981 front end.

Id sure appreciate help on this,Im putting it all back togather this week and rather do it all once

Thanks in advance ,
Lenguini

08-09-2011, 09:29 PM	#1
lenguini Registered User Join Date: Oct 2010 Location: Kelowna B.C. Posts: 743	Lowering with custom height springs Greetings all ! Im building a 1965 swb C10 and have conflicting info on whether to use springs or dropped spindles for front.Id like to be at -3" from stock height and -4" rear,but do not want to compromise handling or performance.Im using an 1981 front end. Id sure appreciate help on this,Im putting it all back togather this week and rather do it all once Thanks in advance , Lenguini Last edited by lenguini; 08-09-2011 at 09:43 PM. Reason: question and need help