Thread: Door reassembly
View Single Post
Old 08-15-2011, 09:09 AM   #4
camshaftgsxr
Registered User
 
camshaftgsxr's Avatar
 
Join Date: Feb 2010
Location: Asheville, N.C.
Posts: 785
Re: Door reassembly

door locks and hardware then vent window with rubber attached the leaving the bolts out of the bottom of the window tracks, next put the regulator in, not bolted, just the crank through the hole. then attach the inside roller on the track on the door and then by cranking the window back and forth the other two rollers will slide right in, then crank it until the bolt holes line up and bolt it in. assuming you have manual windows.
__________________
camshaftgsxr is offline   Reply With Quote