The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 72 Blazer

Thealien · 08-23-2011, 05:43 PM

Make sure you put that VSS on the opposite side of the shifter or it will be really tight.

I made my own crossmember/motor mounts using some DIY4X4 parts.

Pacific fabrication has a crossmember/motor mount for these trucks in 4X4. I believe firebirdjones recently used one on a stock height blazer with good results.

08-23-2011, 05:43 PM	#46
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,120	Re: 72 Blazer - Here we Go Make sure you put that VSS on the opposite side of the shifter or it will be really tight. I made my own crossmember/motor mounts using some DIY4X4 parts. Pacific fabrication has a crossmember/motor mount for these trucks in 4X4. I believe firebirdjones recently used one on a stock height blazer with good results. __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205