[fastwillie 696969]

Chevy Truck - Front Suspension Bolt Torque (ft. lbs.)�*

Model C-10 CP-20-30 K - All G-10-20 G-30
Lower Control Arm Shaft U-bolt 85 85 ----- 65 85
Upper Control Arm Shaft Nuts 70 105 ----- 70 105
Control Arm Rubber Bushings 115 ----- ----- 115 -----
Upper Control Arm Bushing Steel �� New 190 Used 115 ----- New 190 Used 115
Lower Control Arm Bushing Steel �� New 280 Used 115 ----- New 280 Used 115
Upper Ball Joint Nut * 50 ** 90 **100 *50 **90
Lower Ball Joint Nut **90 **90 ***80 *90 *90
Nut, Spindle To Knuckle ----- ----- 65 ----- -----
Crossmember To Side Rail � 65 65 ----- 65 65
Crossmember To Bottom Rail �� 90 90 ----- 90 90
Crossmember Brake Support Struts 60 60 60 60
Stabilizer Bar To Control Arm 25 25 Anchor Plate 130 25
Stabilizer Bar To Frame 25 25 .55 25
Shock Absorber Upper End 140 140 65 75
Shock Absorber Lower End 60 60 65 75
Brake Splash Shield To Knuckle 120 in. lbs. 120 in. lbs. 120 in. lbs. 120 in. lbs.
Wheel Bearing Adjustment ---- ---- Inner 35 Outer ��� ----
Wheel Bearing End Movement .001-.005" .001-.005" .001-.010" .001-.005"
Caliper Mounting Bolt 35 35 ---- 35
Spring - Front Eye Bolt ---- ---- 90 ----
Spring - Rear Eye Bolt ---- ---- 50 ----
Spring - To Rear Shackle Bolt ---- ---- 50 ----
Spring - To Axle U-Bolt ---- ---- 150 ----
Spring - Front Support To Frame ---- ---- 25 ----
Suspension Bumper 15 15 25 15
Stabilizer To Spring Plate ---- ---- 130 ----

* Plus additional torque to align cotter pin. Not to exceed 90 ft. lbs. maximum.

** Plus additional torque to align cotter pin. Not to exceed 130 ft. lbs. maximum