The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

FritzA · 09-08-2011, 02:02 PM

I agree with MARKDTN. The right flywheel and everything else will bolt up.

Are you keeping the tbi or just using the shortblock in a carburated set-up? If going to the tbi, is the donor ECM unit from an automatic or a manual? You may want to rechip so it is a manual chip. You should also look into getting a VSS output for the SM465 so you can get a signal for the ECM to use. There is a website called "jags that run" that has some VSS to put in between the SM465 and the cable to your speedo.

09-08-2011, 02:02 PM	#4
FritzA Registered User Join Date: Jul 2009 Location: Denver Burbs, CO Posts: 115	Re: tbi swap with my sm465 I agree with MARKDTN. The right flywheel and everything else will bolt up. Are you keeping the tbi or just using the shortblock in a carburated set-up? If going to the tbi, is the donor ECM unit from an automatic or a manual? You may want to rechip so it is a manual chip. You should also look into getting a VSS output for the SM465 so you can get a signal for the ECM to use. There is a website called "jags that run" that has some VSS to put in between the SM465 and the cable to your speedo.