The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Tips or tricks to swapping trail and panard bar bushing?

jayharrell · 09-10-2011, 10:54 AM

OK so after pulling everything back apart he main bushing is fine with a #60375 stamped on it. But the smaller spacer with a #64381 stamped it it seems to be too thick. About 3/16'' too thick. Its that much thicker then the other side of the main bushing.

Can anyone verify that the #64381 the correct spacer? They are Prothane from GMC Paul btw.

09-10-2011, 10:54 AM	#19
jayharrell Gettin By on Gettin By Join Date: Jan 2008 Location: Cedar Creek, Tx Posts: 1,033	Re: Tips or tricks to swapping trail and panard bar bushing? OK so after pulling everything back apart he main bushing is fine with a #60375 stamped on it. But the smaller spacer with a #64381 stamped it it seems to be too thick. About 3/16'' too thick. Its that much thicker then the other side of the main bushing. Can anyone verify that the #64381 the correct spacer? They are Prothane from GMC Paul btw. __________________ 69 CST10 LWB 455 Buick 00 S10 2.2 Vin5 76 GL1000 Naked 1bl VW carb "Adios to all the concrete; Gonna get me some dirt road back streets"