|
Re: Which Intake?
Thanks for the input from all of you, the Pro Products intake is indeed a piece of cr@p, but I own it and cant really shell out the duckets for an Edelbrock... In hindsight I wish I had gone with the eddy from the get-go. And as a side note, I did not realize it was chinese made until I got it and flipped it over. CHINA embossed on the bottom side. The Summit intake is not a knock-off it is produced by Weiand foe Summit... Many of Summits house branded items are re-boxed name brands.
Gearhed, are you thinking I'm restricting flow in the 3" exhaust?
BigKEV I had the exhaust valves enlarged to 1.60 do you still think I should run more lift on them than the intake (1.94)
C20-67_N_MO - Dont get me started on that POS... the cap cracked immediately (the coil screws were the culprit), replaced it, never could get it to time correctly as the weights and shaft are crap, module is cheap and starts to break up at varying RPMS.... I yanked and tossed in a 35 year old GM unit with a Delco cap, rotor, and module, still running the SW coil. IMMEDIATE difference in performance. Took me 15 minutes to set cent. timing, base timing, and adjust the vac adv. I messed with the Skip White dizzy for 2 weeks and it would simply run like crap, no matter what. I wouldn't install one on a lawnmower, although I do think its gonna make a mighty purdy primer tool.
__________________
Built NOT Bought.
|