Quote:
Originally Posted by Rick212
OK...I used the search function and went all the way back to 2005 for this thread. I am working on my wife Gails stock 1969 C-10 and want to remove the under dash fuse panel.
What do I need to do? Anybody got any simple steps? I have a clear shot at it and don't see any screws or hex heads to unscrew. Do I unscrew the engine compartment side and the fuse panel will pull off the firewall? I just don't want to go medevil on it and break something.
Of all the work that I have done on her rtuck and my '72 K5, this has me stumped? I'm sure that it is simple........
Thanks...Rick
|
There is 1 screw in the center of the plug on the engine compartment side of the firewall, remove it and unplug the plug on the firewall side. Sometimes the plug is difficult to get unplugged due to paint/undercoating/age. If you plan on using the wiring harness over be careful to not pull any of the wires out of the plug.
In the passenger's compartment side of the firewall, the fuse block has 2 screws kitty-corner from each other. Remove the 2 screws and the fuse block will come free of the firewall. Sorry, no pictures.