|
GROUNDING INST PANEL, I don't remember if I did this with the inst panel off or I sqeezed between the seat and under the steering wheel...but....take a good length wire with a small eyelet spade on both ends...You know the ones that are circles for screws. Undo one of the screws that holds the back of the panel to the plastic face, preferably a lower one, scuff up the metal and the eyelet with some sand paper. Attach one end of the eyelet wire to that screw, then there should be a few predrilled holes on the bottom of the dash below the inst panel, at least my truck had some or drill a small hole and then use a sheet metal screw and attach the other eyelet to the dash. bingo bango grounded inst panel.
|