The '63-'66 C40-60's used the same motor mounts as the '63-'72 trucks with the I6 and small blocks. The frames have brackets for side mount motor mounts. Shouldn't be a problem putting a small block in it. The one thing is if the original engine was a 292 I6, you will have to move the passenger side motor mount bracket on the frame, back to the same distance from the bellhousing as the drivers side. I would there would be holes in the frame.
Quote:
Originally Posted by sdkid
Looking at an old C60 with a dump bed. The engine is bad. I need to know what they use for engine mounts. Are they similar to the 67 and later that bolt to the sides of the block, or the ones that bolt to the front of the engine? I would be putting a late 70's engine in it, if it can be done fairly easy.
|