BobbyK,
Thanks for the clarification on the one wire. It is like I thought but you said it nice and clear. Take a look at this below and correct me if I'm wrong.
Quote:
|
I wired my HEI directly from the PINK IGN. wire at the ign. switch.
|
My point is that if you disconnect the bulkhead connector and pull out the resistance wire type 56 connector. You then have a feed that is the same as you have without the extra wire. That pink wire you are talking about is also the wire that connects to the passenger compartment of the bulkhead connector and feeds the spot where the resistance wire was connected.
Anyone needing more information/clarification just ask.