The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

dznucks · 09-29-2011, 06:22 AM

belowme51 is correct.

I ran 1/2" lines from the tank to the ECU and split the line with a "T" so I was using both inlet ports. 3/8's to the bags. If you use the height sensing feature it will over compensate.

I turned this feature off because the compressor was always filling and it would throw the stablility off in corners. I dont have any other issues with the line size, otherwise.

09-29-2011, 06:22 AM	#4
dznucks Registered User Join Date: Feb 2006 Location: Smyrna, Ga Posts: 1,647	Re: AccuAir... does airline size matter? belowme51 is correct. I ran 1/2" lines from the tank to the ECU and split the line with a "T" so I was using both inlet ports. 3/8's to the bags. If you use the height sensing feature it will over compensate. I turned this feature off because the compressor was always filling and it would throw the stablility off in corners. I dont have any other issues with the line size, otherwise.