The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Tx Firefighter · 08-16-2003, 11:38 PM

I got out the rpaperwork. In the front, we used a Belltech pn 3100 spindle, and a Summit G727 spring. The spindle is 3 inches and spring 2 inches. Total front drop is 5 inches, not 5 1/2.

The rear, I measured the height of the Blazer, then removed the leaf springs completely. I used two floor jacks inder the back to get it to the right stance I wanted. I remeasured then, to determine how much it needed to be dropped. Had a local spring shop rebuild and dearch them, to get rear drop. Cost 106 dollars including new shackle bushings.

08-16-2003, 11:38 PM	#35
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	To clarify a little... I got out the rpaperwork. In the front, we used a Belltech pn 3100 spindle, and a Summit G727 spring. The spindle is 3 inches and spring 2 inches. Total front drop is 5 inches, not 5 1/2. The rear, I measured the height of the Blazer, then removed the leaf springs completely. I used two floor jacks inder the back to get it to the right stance I wanted. I remeasured then, to determine how much it needed to be dropped. Had a local spring shop rebuild and dearch them, to get rear drop. Cost 106 dollars including new shackle bushings. __________________ I'm on the Instagram- @Gearhead_Kevin