Re: Another "no lights thread" 55 2nd 3100
Quote:
Originally Posted by OrrieG
Check your grounding. Should have a #4 ground from cab to battery negative, cab, front clip and bed to frame and frame to battery negative. You have so many things not working that is where I would start. you need good bare metal connections, not just the treads or a sheet metal screw. Once you know the ground is good you can start systematically testing circuits to narrow it down.
|
I drove the truck home with working lights so really at a loss. Wiring was a snakes nest so figured a new harness was a good thing. Tracing out wires through the stock schematic which this one is suppose to follow. Wondering if the switch to alternator by the previous owner is causing grief? Harness I bought was for an alternator. Need to figure out how pwr gets from bat to light switch.
__________________
Life is too short to drive a boring vehicle.
|