The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

john_p · 10-10-2011, 08:19 PM

the supplier of the bullets should be able to answer that.. i would go to a shop and have the parts flared out at least,, then weld or have them welded.. if you're doing the welds the flares are cheap.. even if you don't spend $ at the shop, they can tell you what sizes you need to go with.. the smaller independents are more willing to talk shop..

10-10-2011, 08:19 PM	#3
john_p Registered User Join Date: Aug 2011 Location: Bradley, South Carolina Posts: 277	Re: Exhaust questions the supplier of the bullets should be able to answer that.. i would go to a shop and have the parts flared out at least,, then weld or have them welded.. if you're doing the welds the flares are cheap.. even if you don't spend $ at the shop, they can tell you what sizes you need to go with.. the smaller independents are more willing to talk shop..