The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**swervin ervin** · 08-18-2003, 11:34 PM

You will need to move the regulator. It looks like it slipped on you. No, it won't hurt to run the motor if it's not bolted in. Just don't get you fingers in the gear.

From your drawing, it won't take much get it in the hole.

08-18-2003, 11:34 PM	#6
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	You will need to move the regulator. It looks like it slipped on you. No, it won't hurt to run the motor if it's not bolted in. Just don't get you fingers in the gear. From your drawing, it won't take much get it in the hole. __________________ Mike 1985 Chevy C-10