It will be close but not a 100% bolt in swap. The trailing arm mounts are slightly narrower than what is needed for your '62. Then the panhard bar mounts differently on the '67-'72. You could cut and weld the panhard bar mount from your '62 rear end to the '67-'72 rear end. Or you could use the shorter '65-'72 panhard bar, but you will need to put a slight bend in the end that bolts to the frame.
Quote:
Originally Posted by Chvyman1975
I was looking on Cl and ran across a 12 bolt rear end from a 67-72 pickup. Its has 6 lugs and 3:73 gears. My question is will it be a direct swap for a 62 SWB?
Thanks in advance
|