The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**jocko** · 10-31-2011, 12:38 AM

no need to change any holes/routing, etc - only thing needed to change IF ANYTHING is the length of cable. Budden mentions above, stock length should be good, so just pnp as suggested. If it makes funny noises once hooked up, probably too long or too short and any previously non-existent tight bends can cause the noises. But try your current first, then go from there.

10-31-2011, 12:38 AM	#3
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 18,001	Re: Do I change Speedo cable in my 65 ? no need to change any holes/routing, etc - only thing needed to change IF ANYTHING is the length of cable. Budden mentions above, stock length should be good, so just pnp as suggested. If it makes funny noises once hooked up, probably too long or too short and any previously non-existent tight bends can cause the noises. But try your current first, then go from there.