The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

T2vigil · 10-31-2011, 11:27 AM

I agree with Sig and Vern. IF you want body finish smooth break out the flapper wheels and grind the casting smooth - Show Truck. Use high fill primer and take your time. Don't know how long it will last but smooth and glossy it can be. On the other hand if it is truly orange peal - practice, practice, practice. I have never had OP with a rattle can that was excessive but I have had a lot of practice.

10-31-2011, 11:27 AM	#9
T2vigil Registered User Join Date: Jan 2010 Location: Evensville, TN Posts: 236	Re: Engine paint question I agree with Sig and Vern. IF you want body finish smooth break out the flapper wheels and grind the casting smooth - Show Truck. Use high fill primer and take your time. Don't know how long it will last but smooth and glossy it can be. On the other hand if it is truly orange peal - practice, practice, practice. I have never had OP with a rattle can that was excessive but I have had a lot of practice.