The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - c-10 stuff on a c20

Dusti · 08-21-2003, 08:18 PM

I just got the frontend tore out of my 69 3/4ton the put on disc brakes,it was very dirty under there,after you pressure wash, I would go over all your bolts that you are going to take off with a wire brush to get all the threads clean then soak the nuts with WD/40 or someother good penetrating oil,that should help get them come off better.

I coud'nt believe how much dirt and crud was on the front suspension of that truck,I spent quit afew hours scraping the stuff off with a putty knife and wire brush.

Bob

08-21-2003, 08:18 PM	#4
Dusti Not Dusti,just Bob Join Date: Jul 2002 Location: Camas,Wa Posts: 247	I just got the frontend tore out of my 69 3/4ton the put on disc brakes,it was very dirty under there,after you pressure wash, I would go over all your bolts that you are going to take off with a wire brush to get all the threads clean then soak the nuts with WD/40 or someother good penetrating oil,that should help get them come off better. I coud'nt believe how much dirt and crud was on the front suspension of that truck,I spent quit afew hours scraping the stuff off with a putty knife and wire brush. Bob __________________ 72 cheyenne super 1/2ton 89 camaro