The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Chevy Wrench · 08-22-2003, 01:53 AM

Sounds like either your clutch master or the slave cylinder is going out. Look underneth your dash ( inside) where the push rod goes into the master. Notice any wet spots or fluid leaking? Also, check underneth the truck. Is the slave wet with fluid? Is the resevoir empty? If all checks out, I would say that maybe the throw out bearing is getting ready to go, or one of the springs on the disc has poped out. Kind of hard to diagnose without driving the truck though. It could be a number of things that would do what you described. Good luck.

08-22-2003, 01:53 AM	#2
Chevy Wrench former desert rat Join Date: Feb 2003 Location: salt lake city, utah Home of the 3 M's Mormons, methlabs and minivans Posts: 320	Sounds like either your clutch master or the slave cylinder is going out. Look underneth your dash ( inside) where the push rod goes into the master. Notice any wet spots or fluid leaking? Also, check underneth the truck. Is the slave wet with fluid? Is the resevoir empty? If all checks out, I would say that maybe the throw out bearing is getting ready to go, or one of the springs on the disc has poped out. Kind of hard to diagnose without driving the truck though. It could be a number of things that would do what you described. Good luck. __________________ 94 Chevy Silverado Ext cab 4/6 drop w/ 18's and 2500watt system (work truck). 67 Chevy swb under const. frame off custom, 20's, bagged and a large rat under the hood,and a 1940 Chevy truck under const.