I replaced cab supports, corners and patched the floor years ago. When I did that I beefed things up underneath by welding in a 12 ga. strip over the inner rocker. Last year I replaced the passenger side outer rocker. I wasn't really worried about the cab warping out but took precautions. I measured the door space on the other side and cut a 2X4 to that length then wedged it into the pass side opening. It worked fine, but then again, I was only replacing a rocker and the cab was fairly solid to begin with.
__________________
1970 GMC 1500 Custom
Original 350/TH350
Victoria, BC, Canada
You can wish in one hand and crap in the other.
See which one gets filled first.
|